| Anilox coating machine in the flexible packaging | | | | effect. Be sure to dry the solvent on the cloth will |
| composite is a key component in the binder in the | | | | be anilox roller and floating plastic Kaigan. |
| coating process is often net hole in the anilox | | | | 3, open Solution washing bottle with a protective |
| roller gradually solidified layer of the network | | | | cover, use brush to apply on this uniform Anilox |
| congestion points, resulting in insufficient glue, | | | | cleaner surface, washing Solution must be |
| resulting in composite strength decreased plug the | | | | completely covered by living anilox roller surface |
| network layer of the general points of curing it is | | | | coating thickness of about 0.2 ~ 0.5mm is |
| very difficult to hole it from the network clean. | | | | appropriate . PE or PP film with the anilox roller |
| Landemeike LDX-302 anilox roller cleaning agent | | | | wrap. |
| (cleaning Solution), which is characterized by ease | | | | 4, please wait 15 minutes or so, when you can |
| of use, results are obvious, does not require any | | | | clearly see the layer has been stripped, use a |
| auxiliary settings, the ability to network in a | | | | copper brush or cloth gently wipe off on all. |
| relatively short period of time points in the printing | | | | 5, with water or solvent to clean the anilox roller |
| ink, varnish, paint other curing layer removed, | | | | surface, dried, this time we can see that the |
| restored to a clean anilox roller to maintain its | | | | anilox roller has been cleaned showing a metallic |
| original mass ink, coating results. | | | | color, bright as new. |
| Anilox roller cleaning agent to use: | | | | 6, if we find there is still a small amount of |
| 1, when using Landemeike LDX-302 Wash | | | | residual anilox roller surface traces of cured, first |
| Solution, make the user wear rubber gloves and | | | | of all is the anilox roller surface water completely |
| anti-labor glasses. | | | | dry, then repeat two to four cleaning procedures, |
| Second, pay attention: The cleaning of the anilox | | | | for the left traces of ink and other areas have to |
| roller surface requirements are dry, if the anilox | | | | be cured more than brush several times. At this |
| roller surface with a solvent will affect the cleaning | | | | point, will be able to get a clean of the anilox roller. |